A DESIGN OF TOFU INDUSTRY FACILITIES LAY OUT IN UD. BAROKAH BASED ON THE QUANTITATIVE ANALYSIS USING FROM TO CHART METHOD

  • Nuryati Nuryati Politeknik Negeri Tanah Laut
  • Jaka Darma Jaya Politeknik Negeri Tanah Laut
  • R.Rizki Amalia Politeknik Negeri Tanah Laut
Keywords: Count Moment , Facilitylayout, From To Chart,

Abstract

Layout of production facilities should consider about the flow of materials and the area
required. Based on observasion and analysis of production tofu industry indicate the
presence of a very large mileage and preparation of the layout of production facilities
that are less well, so as the production process is less effective and efficien. Re layout of
setting up is do to get replan setting up facilities with change of coun moment in the
minimal. Quantitative analysis is count all material based on material quantitative that is
change and from to chart used to fine the changing distance to more shont. The result of
quantitative analysis using the method from to chart shows that the difference of the
displacement distance between the initial layout of the company with the proposed layout
on the first iteration there is a moment of 1,575,120 in every year, while in the second
iteration there is a displacement moment of 1,492,260 in every year. So the layout that
has the smallest number of displacement moments is the layout on the second iteration.

Downloads

Download data is not yet available.

References

Ekoanindiyo. F dan Wedana. Y. 2012. Perancangan Tata Letak Gudang
Menggunakan Metode Shared Storage Di Pabrik Plastik Kota Semarang.
Dinamika Teknik. Vol.VI, No. 1.
Pratiwi, I., Muslimah, E., dan Aqil, A. 2012. Perancangan Tata Letak Fasilitas di
Industri Tahu Menggunakan Blocplan. Jurnal Ilmiah Teknik Industri,
Vol. 11, No. 2.
Wingjosoebroto, S. 2009. Tata Letak Pabrik Dan Pemindahan Bahan. Penerbit:
Guna Widya Surabaya.
Syafa’at, I. dan Ratnani, R. 2016. Penataan Ulang Tata Letak Fasilitas Pabrik
Tahu “Susukan” Desa Tamanrejo Kendal. Abdimas Unwahas, Vol. 1,
No. 1.
Yeni. 2011. Perancangan Tata Letak Fasilitas Produksi Pada Industri Makanan.
Prosiding Konferensi Nasional “Inovasi dalam Desain dan Teknologi.
ISSN : 2089‐1121.
Yuliant, R., Saleh, A., dan Bakar, A. 2014. Usulan Perancangan Tata Letak
Fasilitas Perusahaan Garmen CV. X Dengan Menggunakan Metode
Konvensional. Reka Integra, ISSN: 2338-5081, Vol. 02, No. 03.
Published
2018-01-18