A STUDY OF CHARACTERISTICS AND DESIGN OF FLEXIBILITY CAPACITY IN HIGH QUALITY CONCRETE
The world of construction is rapidly developing, and the more advanced the technology is
the more use of high-strength concrete will be found. Through this literature review the
characteristics and the concept of high-strength concrete flexural capacity design can be
studied, and that includes physical and mechanical properties that can be used as the
basis in the applications of high-strength concrete as a material for construction. In
Indonesia, the SNI 03-2847-2002 standards only regulate the use of normal-strength
concrete and have not covered issues related to high-strength one.
This is important since in Indonesia high-strength concrete has been used as structural
material. Hence, better knowledge regarding high-strength concrete is needed to ensure
the conformity between the design and the structural requirements.
By comparing SNI 03-2847-2002 standards with those from several other countries using
flexural capacity analysis on high-strength concrete, it is found that the SNI 03-2847-
2002 standards can still be used in the design of cross sections of high-strength concrete.
(ACI 318 M-08), American Concrete Institute.
Badan Standardisasi Indonesia, 2002, Tata Cara Perhitungan Struktur Beton
untuk Bangunan Gedung (SNI 03-2847-2002).
Darmansyah Tjitradi (UNLAM), Rachmat Purwono (ITS), Priyosulistyo (UGM),
2002, Daktilitas Kolom Segiempat Berlubang yang Terkekang pada
Beton Mutu Tinggi, Majalah Ipteks, ITS Surabaya, Vol 13 No. 2, Edisi
Ertekin Oztekin, Selim Pul, Metin Husem, 2003, Determination of rectangular
stress block parameters for high performance concrete, Engineering
Structures Vol. 25, pp. 371–376.
Harianto Hardjasaputra, 2009, Mungkinkah beton sekuat baja?, Majalah
Helland, 1996, Utilization of High Strength Concrete, Fourth International
Symposium on the utilization of HS/HPC, Paris, 29-31 May.
Park R & Paulay T, 1975, Reinforced Concrete Structures, John Willey & Sun.
Raka IGP., 1997, Mengenal Beton Mutu Tinggi, Seminar Sehari Profesionalisme
Sarjana Teknik Dalam Memenuhi Tuntutan Lapangan Kerja Menjelang
Persaingan Global Tahun 2003, Himpunan Mahasiswa Sipil Fakultas
Teknik Udayana Denpasar, 12 September 1997.